西秦岭温泉花岗岩体岩石学特征及岩浆混合标志

温泉花岗岩体由酸性端元的寄主岩石和暗色微细粒镁铁质包体群及基性岩墙群组成。无岩浆混合作用或岩浆混合作用较弱区段，寄主岩石以似斑状二长花岗岩为主．显示正常的花岗岩结构构造岩浆混合作用强烈区段。岩石的异常结构构造十分发育．矿物之间自形程度差异显著．常见包晶反应、包含结构、交代边、熔蚀边、交代蚕食的港湾状结构构造及交代缝合线、矿物镶边、斜长石异常环带和矿物残留等，多见指示岩浆混合的标志性矿物针状磷灰石。暗色微粒包体中多见寄主二长花岗岩中的捕掳晶。包体的形态、结构构造以及与寄主岩石强烈地成分交换等均是岩浆混合作用的标志。     

四川石棉独立碲矿床蚀变岩的地质地球化学研究

四川石棉大水沟独立碲矿床堪称世界首例，其矿体两侧的围岩蚀变较窄，且蚀变带与矿脉及未蚀变岩呈清楚而截然的接触关系。主要围岩蚀变为白云石化、白（绢）云母化、云英岩化及电气石化等。这些蚀变作用分别发生于１７７．７～１６５．１Ｍａ和９１．７１～８０．１９Ｍａ。蚀变作用过程中ＳｉＯ２大量析出，Ａｌ２Ｏ３、ＴｉＯ２、ＣａＯ、ＭｇＯ、Ｋ２Ｏ、Ｈ２Ｏ、ＣＯ２、Ｆｅ２Ｏ３、ＭｎＯ则有不同程度地带入。与此同时，ＲＥＥ在此过程中包集体迁出，Ｔｅ、Ｂｉ、ＡＳ等元素的含量则决定于蚀变作用及其强度，而与原岩无关。     

山东内生金矿矿床谱系及其致矿地质异常

矿床谱系是对成矿多样性的理论概括,而成矿多样性又是由不同级别、不同性质的致矿地质异常决定的.本文论述了山东省内生金矿矿床谱系及其致矿地质异常.     

凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。     

东秦岭火山岩的地球化学特征和成因模式

熊耳群为玄武粗安岩-英安流纹岩组合,大红口组为粗面岩组合,属B类的过渡型拉斑玄武岩浆系列,具以太华群为岩浆房的壳幔混染型成因;秦岭群和宽坪群为变拉斑玄武岩建造,属A类拉斑玄武岩浆系列,具幔源型成因;二郎坪群和丹凤群属细碧岩-石英角斑岩建造,C类石英角斑岩浆系列与A类拉斑玄武岩浆系列共存,具壳幔双层混合型成因。     

黄金的成色

黄金的成色并不是一成不变的，它成色的高低是与成矿温度、成矿阶段、深度、时代、变质程度、水溶液及风化作用等有一定关系，我们从这些关系中可以寻找到我们找矿的捷径和依据。     

柿竹园矿床大理岩型锡矿石工艺矿物学研究

大理岩型锡矿石产于燕山早、中期千里山花岗岩与中、上泥盆统灰岩的外接触带。矿石呈细脉、网脉浸染状,锡矿物有:锡石、黄锡矿,富钛尼日利亚石、尼日利亚石和木锡矿,脉石矿物绿帘石、石榴石、电气石、萤石、方解石及磁黄铁矿等亦含锡,锡主要呈锡的浊立矿物存在,占总锡量的89.78％,其中锡石锡占总锡量的80.01％,其次有呈类质同象形式存在的锡,在绿帘石、石榴石、电气石等矿物中以Sn~(4+)取代Fe~(3+),这类锡占总量的8.33％。工艺矿物学研究表明,该类锡矿石以“贫”、“细”、“杂”为特征。锡不仅十分分散,而且品位偏低,矿石矿物组合及镶嵌关系复杂、相互包裹,紧密连生;锡矿物粒度微细,粒径一般为0.2～0.01mm,部分为<0.0l～0.002mm,是一种难选的锡矿石类型。通过锡的回收试验,采用选冶联合工艺流程,预测锡的最佳回收率可达50％以上。     

Anhydrite pseudomorphs and the origin of stratiform Cu–Co ores in the Katangan Copperbelt (Democratic Republic of Congo)

The stratiform Cu–Co ore mineralisation in the Katangan Copperbelt consists of dispersed sulphides and sulphides in nodules and lenses, which are often pseudomorphs after evaporites. Two types of pseudomorphs can be distinguished in the nodules and lenses. In type 1 examples, dolomite precipitated first and was subsequently replaced by Cu–Co sulphides and authigenic quartz, whereas in type 2 examples, authigenic quartz and Cu–Co sulphides precipitated prior to dolomite and are coarse-grained. The sulphur isotopic composition of the copper–cobalt sulphides in the type 1 pseudomorphs is between −10.3 and 3.1‰ relative to the Vienna Canyon Diablo Troilite, indicating that the sulphide component was derived from bacterial sulphate reduction (BSR). The generation of during this process caused the precipitation and replacement of anhydrite by dolomite. A second product of BSR is the generation of H₂S, resulting in the precipitation of Cu–Co sulphides from the mineralising fluids. Initial sulphide precipitation occurred along the rim of the pseudomorphs and continued towards the core. Precipitation of authigenic quartz was most likely induced by a pH decrease during sulphide precipitation. Fluid inclusion data from quartz indicate the presence of a high-salinity (8–18 eq. wt.% NaCl) fluid, possibly derived from evaporated seawater which migrated through the deep subsurface. ⁸⁷Sr/⁸⁶Sr ratios of dolomite in type 1 nodules range between 0.71012 and 0.73576, significantly more radiogenic than the strontium isotopic composition of Neoproterozoic marine carbonates (⁸⁷Sr/⁸⁶Sr = 0.7056–0.7087). This suggests intense interaction with siliciclastic sedimentary rocks and/or the granitic basement. The low carbon isotopic composition of the dolomite in the pseudomorphs (−7.02 and −9.93‰ relative to the Vienna Pee Dee Belemnite, V-PDB) compared to the host rock dolomite (−4.90 and +1.31‰ V-PDB) resulted from the oxidation of organic matter during BSR.     

能量色散X射线荧光光谱法测定钼矿石中钼铅铁铜

建立了能量色散X射线荧光光谱法测定钼矿石中钼、铅、铁、铜的方法,讨论了粒度效应、矿物效应的影响因素,确定了采取粉末样品,用系列标准样品建立工作曲线,通过元素间相互校正消除基体效应,用内控标准样品考察了方法的精密度(RSD,n=11)为0.44%～15.4%。实际样品的测定结果和化学法相符,可满足日常分析工作需要。     

XEPOS型偏振能量色散X射线荧光光谱仪分析蒙古铁矿石

以熔融玻璃片和粉末压片制样,采用XEPOS型偏振能量色散X射线荧光光谱仪,建立了铁矿石中总铁、氧化钙、氧化镁、二氧化硅、三氧化二铝、硫、磷、铜等组分的快速分析方法。着重讨论硫、磷两元素测定的可行性和Lucas-Tooth、Price数学校正模型的适应性和改善方法的途径。